Crystals with a hexagonal close-packed crystal structure are inherently anisotropic, and have a limited number of independent slip systems, which lead to strong deformation textures and reduced formability in polycrystalline products. In magnesium (Mg), all of the easy slip systems have a Burgers vector in the <a> direction making twinning necessary for arbitrary shape changes. The most common twinning system which allows extension along the c-axis is {10-12}<10-11>. A good predictor of slip is the global Schmid factor, which resolves the externally applied force onto the slip plane and direction of a crystal. The critically resolved shear stress (CRSS) at which a grain twins is not readily measured by experiment and the CRSS for twin initiation often appears larger than for twin propagation. In polycrystals, twin variants with both low and high Schmid factors have been observed indicating that this Schmid factor is inappropriate to predict twinning and more local effects play an important, though still uncertain role.
In this work, experiments were devised to dynamically study extension twinning in a polycrystalline Mg alloy AZ31B with a strong basal rolling texture by tensile deformation parallel to the plate normal. Three-dimensional X-ray diffraction using a synchrotron source was used to map the centre-of-mass positions, orientations, and grain-resolved elastic strain tensors of over 1000 grains in-situ up to a true strain of 1.4%. The majority of twins formed in grains with a high local Schmid factor; however, low-ranked twin variants were common. The average grain-resolved stress did not always select the highest twin variant and resulted in some negative Schmid factors. The internal stress state of parent grains and twinned grains did not differ significantly within the large measurement uncertainties. The misorientations between grains ideally oriented for twinning and their nearest neighbours could not explain cases of no twin activity. Results suggest that the controlling factors for twin formation are much more local and not captured within the spatial resolution of the technique. Complimentary measurement of the strain rate sensitivity during twinning, by instantaneous strain rate change tests, suggest that basal slip is a part of this local process. / Thesis (Master, Mechanical and Materials Engineering) -- Queen's University, 2013-03-12 13:40:26.039
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OKQ.1974/7850 |
| Date | 12 March 2013 |
| Creators | Majkut, MARTA |
| Contributors | Queen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.)) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English, English |
| Detected Language | English |
| Type | Thesis |
| Rights | This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner. |
| Relation | Canadian theses |
Page generated in 0.0021 seconds