Diffractive zone-plate lenses are widely used as optics in high-resolution x-ray microscopes. The achievable resolution in such microscopes is presently not limited by the x-ray wavelength but by limitations in zone-plate nanofabrication. Thus, for the advance of high-resolution x-ray microscopy, progress in zone-plate nanofabrication methods are needed. This Thesis describes the development of new nanofabrication processes for improved x-ray zone-plate optics. Cold development of the electron-beam resist ZEP7000 is applied to improve the resolution of soft x-ray Ni zone plates. The influence of developer temperature on resist contrast, resolution, and pattern quality is investigated. With an optimized process, Ni zone plates with outermost zone widths down to 13 nm are demonstrated. To enhance the diffraction efficiency of Ni zone plates, the concept of Ni-Ge zone plates is introduced. The applicability of Ni-Ge zone plates is first demonstrated in a proof-of-principle experiment, and then extended to cold-developed Ni zone plates with outermost zone widths down to 13 nm. For 15-nm Ni-Ge zone plates a diffraction efficiency of 4.3% at a wavelength of 2.88 nm is achieved, which is about twice the efficiency of state-of-the-art 15-nm Ni zone plates. To further increase both resolution and diffraction efficiency of soft x-ray zone plates, a novel fabrication process for W zone plates is developed. High resolution is provided by salty development of the inorganic electron-beam resist HSQ, and cryogenic RIE in a SF6 plasma is investigated for high-aspect-ratio W structuring. We demonstrate W zone plates with 12-nm outermost zone width and a W height of 90 nm, resulting in a 30% increase in theoretical diffraction efficiency compared to 13-nm efficiency-enhanced Ni-Ge zone plates. In addition to soft x-ray zone plates, some lenses for hard x-ray free-electron-laser applications were also fabricated during this Thesis work. Fabrication processes for the materials W, diamond, and Pt were developed. We demonstrate Pt and W-diamond zone plates with 100-nm outermost zone width and respective diffraction efficiencies of 8.2% and 14.5% at a photon energy of 8 keV. / QC 20111114
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-47409 |
| Date | January 2011 |
| Creators | Reinspach, Julia |
| Publisher | KTH, Biomedicinsk fysik och röntgenfysik, Stockholm : KTH Royal Institute of Technology |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Trita-FYS, 0280-316X ; 2011:55 |
Page generated in 0.0096 seconds