Return to search

X-ray diffraction from point-like imperfection

Displacement fields from point-like defects are investigated by x-ray diffraction. The atomic volume changes in the interstitial compounds using crystallographic information has been found to correlate with the size of filled octahedral sites. Systematic correlations enable estimates to be made of the components of the dipole tensor for interstitials in octahedral sites for binary systems containing N, C, and 0 in V, Nb, Ta, Cr, Mo, W, and Fe lattices.

X-ray diffraction analysis of the concentration and residual stress gradients in N implanted Mo crystals and Nb films show that the dominant source of internal strain arises from N located in octahedral sites. For Nb implanted at LNT, these distortion centers are aligned equally along three mutually perpendicular directions to maintain cubic symmetry.

Large biaxial residual strains are developed after a 5at% implantation of N into Nb and Mo. Radiation damage is present as small vacancy and interstitial loops.

A method was developed to obtain the orientation function for samples containing a fiber texture. A slit correction is included and the final results from this simplified approach are compared with the pole figure measured by direct x-scanning. Knowing the orientation function allows one to correct the integrated intensities to that for an ideal powder, thereby allowing thermal and static displacements to be obtained from textured samples.

Anisotropic displacements about coherent Be rich GP zones were investigated in a Cull-at%Be alloy. The results indicate that the attenuation factor 2M which determines the relative integrated intensities of Bragg, quasiline, and static diffuse scattering can be expressed in a simplified form. Experimental data of 2M for aged Cu-Be samples show an anisotropy. The anisotropy increases with increasing aging time when the equiaxed-GP zones formed in the early stage collapse into platelike GP zones. / Ph. D.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/39459
Date23 September 2008
CreatorsHe, Baoping
ContributorsMaterials Engineering Science, Houska, Charles R., Smith, Charles W., Lytton, Jack L., Farkas, Daniel R., Rao, Satish I.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeDissertation, Text
Formatxiii, 252 leaves, BTD, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationOCLC# 25753570, LD5655.V856_1992.H4.pdf

Page generated in 0.0021 seconds