An investigation has been carried out to reduce the deformation behavior of polyethylene (PE) woven geotextile fabric by making PE fabric-glass yarn composite structure using stitching and laminating. The results showed that reinforcement significantly reduced the creep and IED as long as the tensile stress is lower than the total load bearing capacity of the glass yarns in the composite structure. However, the strength of PE-glass composite fabric was solely dependent on the strength of the glass yarns. The strength from PE yarns only contributes when all glass yarns are broken. Cast result of concrete columns using the glass yarn reinforced PE fabric by stitching method suggested that the glass yarn must face outside of the fabric formwork to avoid damage of both fabric surface and column surface.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:MWU.1993/23268 |
| Date | 16 January 2014 |
| Creators | Xiong, Jun |
| Contributors | Rahman, Mashiur (Textile Sciences), West, Mark (Architecture) Feltham, Tammi (Textile Sciences) Chen, Ying (Biosystems Engineering) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Detected Language | English |
Page generated in 0.0027 seconds