This thesis presents the development and validation of a high ductility seismic resistant steel brace connector called the Yielding Brace System (YBS) that improves the earthquake performance of steel braced frame buildings. The connector is comprised of two steel castings which dissipate seismic energy through flexural yielding of specially designed triangular yielding fingers. In this body of work, the need for such a system is presented along with a summary of previously developed steel castings for enhanced earthquake performance of building structures. The development of the YBS concept is then discussed in detail and equations are developed to predict the elastic and plastic response of a YBS connector based on the geometry of the yielding fingers. The low-cycle fatigue life of the cast steel material used for the yielding elements of the YBS is characterized based on the results of several cyclic, small-scale yielding fingers tests and a low-cycle fatigue life prediction model is derived. Following this, the design of a prototype connector for the second storey brace of a fictitious six storey sample building located in Los Angeles is presented. This design is conducted using the low-cycle fatigue prediction model, the response prediction equations and non-linear finite element analysis. Results of four full-scale prototype tests are then presented. Two of the tests are axial tests of the device alone, while the other two are full-scale braced frame tests. Finally, the design of a 12-storey sample building is presented. This building design is then evaluated via non-linear time-history analysis using the FEMA P-695 methodology. The results from these analyses are then discussed and compared to a similar study conducted on the same building designed with buckling restrained braces. This work shows that the Yielding Brace System is a highly ductile, seismic resistant brace that can be used as an alternative to the buckling restrained brace with the potential to provide a stiffer structure with increased ductility.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/34020 |
| Date | 12 December 2012 |
| Creators | Gray, Michael G. |
| Contributors | Christopoulos, Constantin, Packer, Jeffrey A. |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0015 seconds