The objective of this licentiate thesis was to study the effect of tool wear for sheet metal forming tools and how the wear process can be simulated in an efficient manner. Three Papers are appended to this licentiate thesis. Paper A covers the influence of tool geometry in deep drawing. In paper B is the way of calculating with finite element analysis described. The wear of a steel cylinder oscillating against a steel plate was studied experimentally. The worn shape of the cylinder was then compared with a numerical simulation of the shape. Paper C shows how numerical simulations can be used to simulate wear of deep drawing tools. The wear of two different deep drawing tools has been investigated. The shape of the tools before and after wear have been compared as well as the stresses and strains in the formed cups. / Godkänd; 2000; 20070317 (ysko)
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-26185 |
Date | January 2000 |
Creators | Öqvist, Mona |
Publisher | Luleå tekniska universitet, Luleå |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | Licentiate thesis / Luleå University of Technology, 1402-1757 ; 2000:54 |
Page generated in 0.0023 seconds