Proportional, integral and derivative (PID) controller tuning guidelines in process industry have been in place for over six decades. Nevertheless despite their long design history PID tuning has remained an ‘art’ and no single comprehensive solution yet exists. In this study various considerations, with new and different perspectives, have been taken into account in PID tuning design. This study explores the issue of PID tuning from a practical point of view with particular focus on robust design in the presence of typical problems in process industry: process changes, valve stiction effects and unmeasured disturbances.
The IMC tuning rule is recommended for setpoint tracking, while in the case of regulation, a newly proposed tuning rule, based on a combination of IMC and Ziegler-Nichols method, is demonstrated to give satisfactory results. The results were evaluated by simulation and were also validated on a computer-interfaced pilot scale continuous stirred tank heater (CSTH) process. / Chemical Engineering
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:AEU.10048/647 |
| Date | 11 1900 |
| Creators | Amiri, Mohammad Sadegh |
| Contributors | Shah, Sirish L. (Chemical and Materials Engineering), Koch, C. R. (Mechanical Engineering), Dubljevic, S. (Chemical and Materials Engineering) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 3913128 bytes, application/pdf |
Page generated in 0.0015 seconds