The widespread use of hydrogenated amorphous silicon (a-Si:H) devices prompted the need for models to identify challenges and solutions early
on in the design process.Hydrogenated amorphous silicon photodiodes are commonly used as sensors in large area scanners. It is possible to
describe a-Si:H n-i-p photodiodes using an empirical model, which this dissertation presents.
Segmented a-Si:H n-i-p photodiodes of varying sizes were fabricated via plasma enhanced chemical vapor deposition. The dark current-voltage
characteristics were then measured at different temperatures. Thecapacitance and the quantum efficiency of the devices were also characterized.
Using simple semiconductor device equations and the observed empirical behavior, a model is built with a series of parameterized equations. The
forward bias current characteristics are represented by the weighted sum of a low bias exponential relationship and a high bias power law
relationship. The reverse bias current is modeled as the sum of the bulk thermal component and the edge leakage component. A linear bias
dependent equation is used to represent the diode capacitance and a fourth order polynomial is used to model the quantum efficiency. The
devices are characterized and the parameters are extracted from the empirical results. Good agreement has been obtained by comparing the
results of the proposed model with the experimental results.
| Identifer | oai:union.ndltd.org:WATERLOO/oai:uwspace.uwaterloo.ca:10012/3015 |
| Date | January 2007 |
| Creators | Chuang, Tsu Chiang |
| Source Sets | University of Waterloo Electronic Theses Repository |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | 20784173 bytes, application/pdf |
Page generated in 0.0017 seconds