The objective of this thesis was to model the Fuzz Face , a transistor-based guitar distortion effect, digitally at the circuit level, and explore how changes in the discrete analog components change the digital model. The circuit was first simulated using SPICE simulation software. Typically outputs and how they changed based on transistor gains were documented. A test circuit was then constructed in lab to determine true transistor gains. An analog Fuzz Face circuit was then constructed, and physical parameters were recorded. A digital model was then created using MATLAB. Capacitive filtering effects were found to be negligible in terms of the guitar signal and were not modeled. The transistors were modeled using the Ebers-Moll equations. A MATLAB algorithm was written to produce Fuzz Face type distortion given an input guitar signal. The algorithm used numerical techniques to solve the nonlinear equations and stored them in a look-up table. This table was used to process the input clips. The sound of the Fuzz Face was not perfectly modeled, but the equations were found to provide a reasonable approximation of the circuit. Further study is needed to determine a more complete modeling equation for the circuit.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/10566 |
| Date | 13 April 2006 |
| Creators | Overton, William Ernest |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Format | 1437132 bytes, 1437132 bytes, 649175 bytes, 327874 bytes, 1437132 bytes, audio/x-wav, audio/x-wav, application/pdf, audio/x-wav, audio/x-wav |
Page generated in 0.0021 seconds