In this study, silicon nanocrystals (NC) were synthesized in silicon dioxide matrix by ion implantation followed by high temperature annealing. Annealing temperature and duration were varied to study their effect on the nanocrystal formation and optical properties. Implantation of silicon ions was performed with different energy and dose depending on the oxide thickness on the silicon substrate. Before device fabrication, photoluminescence (PL) measurement was performed for each sample. From PL measurement it was observed that, PL emission depends on nanocrystal size determined by the parameters of implantation and annealing process. The peak position of PL emission was found to shifts toward higher wavelength when the dose of implanted Si increased. Two PL emission bands were observed in most cases. PL emission around 800 nm originated from Si NC in oxide matrix. Other emissions can be attributed to the luminescent defects in oxide or oxide/NC interface.
In order to see electroluminescence properties Light Emitting Devices (LED) were fabricated by using metal oxide semiconductor structure, current-voltage (I-V) and electroluminescence (EL) measurements were conducted. I-V results revealed that, current passing through device depends on both implanted Si dose and annealing parameters. Current increases with increasing dose as one might expect due to the increased amount of defects in the matrix. The current however decreases with increasing annealing temperature and duration, which imply that, NC in oxide behave like a well controlled trap level for charge transport. From EL measurements, few differences were observed between EL and PL results. These differences can be attributed to the different excitation and emission mechanisms in PL and EL process. Upon comparision, EL emission was found to be inefficient due to the asymmetric charge injection from substrate and top contact. Peak position of EL emission was blue shifted with respect to PL one, and approached towards PL peak position as applied voltage increased. From the results of the EL measurements, EL emission mechanisms was attributed to tunneling of electron hole pairs from top contact and substrate to NC via oxide barrier.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/3/12606557/index.pdf |
| Date | 01 September 2005 |
| Creators | Kulakci, Mustafa |
| Contributors | Turan, Rasit |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0017 seconds