A study of ammonia-water desorption in compact counter-flow geometries was conducted. Two novel vapor generation units, comprising integrated desorber, analyzer, and rectifier segments that use microchannel geometries, were conceptualized. The branched-tray concept features a desorber segment that uses predominantly pool-boiling mechanisms for desorption, while the vertical column desorber relies on falling-film evaporation and boiling mechanisms. Both concepts rely on falling-film heat and mass transfer mechanisms in the analyzer and rectifier sections. Segmented heat and mass transfer models, based on available correlations and modeling methodologies, were developed and used for the design of branched tray and vertical column test sections. An experimental facility was designed and constructed to evaluate desorption and rectification heat and mass transfer processes within these components, under realistic operating conditions. Data were analyzed to determine the boiling/evaporation (desorber) and condensation (rectifier) heat transfer coefficients, and to determine values of the desorber liquid and vapor mass transfer coefficients. Additionally, high-speed video and images were used to gain insights into the hydrodynamic phenomena and heat transfer mechanisms in these vapor generation units. Results of the heat and mass transfer analysis were compared with the predictions of correlations and modeling methods in the literature. The vapor generation unit (VGU) test sections were evaluated across a range of concentrated solution mass fractions (0.400 โ 0.550), desorber coupling-fluid inlet temperatures (170 โ 190แตC), and concentrated solution flow rates (0.70 โ 1.3 g s-1). Flow rates in this range correspond to desorber liquid Reynolds numbers of approximately 175 to 410 for the branched tray design, and desorber film Reynolds numbers of approximately 90 to 215 for the vertical column. Pressures observed within the VGU test sections ranged from approximately 1620 to 2840 kPa during testing. The novel VGUs were shown to achieve ideal cooling capacities as high as 432 and 323 W for the branched tray and vertical column, respectively. This parameter indicates the cooling capacity that would be achieved by an idealized cooling system using the refrigerant stream produced by the experimental VGU. Ideal COPs of 0.561 and 0.496 were demonstrated for the branched tray and vertical column, respectively. Experimental heat transfer coefficients were found to range from approximately 1860 to 11690 W m-2 K-1 for the pool-boiling desorption of the branched tray VGU. A new correlation was proposed and shown to provide good agreement with the data, achieving average and average absolute deviation of -5.2 and 16.1%, respectively, across the range of conditions tested. Falling-film evaporation/boiling heat transfer coefficients, determined for the desorption process in the vertical column VGU, were found to range from approximately 1290 to 4310 W m-2 K-1. Rectifier condensation heat transfer coefficients ranging from approximately 160 to 250 W m-2 K-1 were observed. Mass transfer coefficients for the desorbers of both concepts were also quantified. These results were used to develop revised heat and mass transfer models of the VGU concepts. The revised models were demonstrated to predict component-level performance with reasonable accuracy, and may be used in the design of future compact VGUs with similar geometries and operating conditions.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/54389 |
| Date | 07 January 2016 |
| Creators | Delahanty, Jared Carpenter |
| Contributors | Garimella, Srinivas |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Language | en_US |
| Detected Language | English |
| Type | Dissertation |
| Format | application/pdf |
Page generated in 0.0026 seconds