<p>This report describes the manufacture and control of a flying platform. The report describes the basic and fundamental theories required to get the platform flying. It touches on subjects such as A/D-conversion. PWM-control and PID-control. The sensors used in the platform are a gyro and an accelerometer. The platform is controlled from a ground station through a wireless link. The wireless link is an Xbee-module that implements the ZigBee-protocol. The microprocessor used is the Atmega 128 by Atmel.</p><p>An indirect complementary filter is used to get the angle of the platform. For the platform to be able to balance a more thourough analysis of the gyro is required. This sensor proved to be more difficult to handle than first anticipated. Every component except the gyro worked as expected. Every algorithm and method reported in this work have been implemented and tested in software.</p>
Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-57726 |
Date | January 2010 |
Creators | Waldsjö, Jonathan |
Publisher | Linköping University, Linköping University, Linköping University |
Source Sets | DiVA Archive at Upsalla University |
Language | Swedish |
Detected Language | English |
Type | Student thesis, text |
Page generated in 0.0014 seconds