Thesis (MScEng)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: The designs of pump intake structures are generally verified by means of a hydraulic model study to ensure the structure will operate without large air or swirl entraining vortices. This is an expensive and time consuming process. The popularity of Computational Fluid Dynamics (CFD) is ever increasing in the engineering world and the use thereof in the modelling of flows in pump intake structures is just one of the many areas of focus. The use of a validated CFD model in the design phase of pump intakes would be beneficial, and ideally would reduce the frequency of requiring hydraulic model studies.
This study investigates the applicability of using a 3 dimensional CFD model as a design tool by validation with a physical model. A physical model of a simple pump intake was available and with a few modifications the flow conditions were significantly improved. The quantitative validation of the CFD model was carried out by means of comparing corresponding point velocity magnitudes. An Acoustic Doppler Velocimeter (ADV) was used in the physical model. The data obtained were successfully filtered to remove noise and other disturbances. The qualitative validation was done by means of photographs and observations. The photographs made use of illuminated tracer particles to identify flow patterns.
The CFD model compares well qualitatively, but the velocity magnitudes are not yet sufficiently reliable. It is recommended that the CFD model can be used for qualitative studies, but future research should focus on the accuracy of the CFD model. Using higher resolution velocity measurements in the physical model by means of other types of instruments, a better comparison can be made, as well as enabling validation of the ADV readings. / AFRIKAANSE OPSOMMING: Die ontwerpe van die pomp inname strukture word gewoonlik bevestig deur middel van 'n hidrouliese model studie om lug-intrekking te minimeer. Dit is 'n duur en tydrowende proses . Die gebruik van Computational Fluid Dynamics ( CFD ), ‘n tipe numeriese modelle neem toe in die ingenieurswese wêreld. Die gebruik daarvan in die modellering van vloei in pomp inname strukture is net een van die vele areas van toepassing . Die gebruik van 'n betroubare CFD model in die ontwerp fase van pomp innames sal voordelig wees , en ideaal sou die noodaaklikheid van fisiese hidrouliese model studies verminder.
Hierdie studie ondersoek die toepaslikheid van die gebruik van 'n 3 -dimensionele model CFD model as 'n ontwerp instrument deur bevestiging met 'n fisiese model . 'n Eenvoudige pomp-inname model was beskikbaar en het met ‘n paar veranderinge die vloei toestande aansienlik verbeter . Die kwantitatiewe bevestiging van die CFD model is uitgevoer deur middel van vergelyking van korresponderende punt snelheid groottes. In die fisiese model is die snelhede met 'n Akoestiese Doppler Velocimeter (ADV) gemeet. Die data wat verkry is suksesvol gefiltreer om geraas en ander versteurings te verwyder . Die kwalitatiewe bevestiging is gedoen deur middel van foto's en waarnemings. In die foto's is gebruik gemaak van verligte spoor deeltjies om vloei patrone te identifiseer. Die CFD model vergelyk kwalitatief goed, maar die snelheid groottes is nog nie voldoende betroubaar nie. Dit word aanbeveel dat die CFD model gebruik kan word vir kwalitatiewe studies, maar toekomstige navorsing behoort te fokus op die verbeteringe van dieakkuraatheid van die CFD model. Met behulp van 'n hoër resolusie snelheid metings van die fisiese model, deur middel van ander tipe instrumente, kan 'n beter vergelyking gemaak word , sowel as die geldigheid van die ADV lesings in staat te stel.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/86337 |
| Date | 04 1900 |
| Creators | Hoppe, Mark Mathew |
| Contributors | Kamish, W., Stellenbosch University. Faculty of Engineering. Dept. of Civil Engineering. |
| Publisher | Stellenbosch : Stellenbosch University |
| Source Sets | South African National ETD Portal |
| Language | en_ZA |
| Detected Language | Unknown |
| Type | Thesis |
| Format | xvii, 142 p. : ill. |
| Rights | Stellenbosch University |
Page generated in 0.0024 seconds