Return to search

Modelling, information capacity, and estimation of time-varying channels in mobile communication systems

In the first part of this thesis, the information capacity of time-varying fading channels is analysed using finite-state Markov channel (FSMC) models. Both fading channel amplitude and fading channel phase are modelled as finite-state Markov processes. The effect of the number of fading channel gain partitions on the capacity is studied (from 2 to 128 partitions). It is observed that the FSMC capacity is saturated when the number of fading channel gain partitions is larger than 4 to 8 times the number of channel input levels. The rapid FSMC capacity saturation with a small number of fading channel gain partitions can be used for the design of computationally simple receivers, with a negligible loss in the capacity. Furthermore, the effect of fading channel memory order on the capacity is studied (from first- to fourth-order). It is observed that low-order FSMC models can provide higher capacity estimates for fading channels than high-order FSMC models, especially when channel states are poorly observable in the presence of channel noise. To explain the effect of memory order on the FSMC capacity, the capacities of high-order and low-order FSMC models are analytically compared. It is shown that the capacity difference is caused by two factors: 1) the channel entropy difference, and 2) the channel observability difference between the high-order and low-order FSMC models. Due to the existence of the second factor, the capacity of high-order FSMC models can be lower than the capacity of low-order FSMC models. Two sufficient conditions are proven to predict when the low-order FSMC capacity is higher or lower than the high-order FSMC capacity. In the second part of this thesis, a new implicit (blind) channel estimation method in time- varying fading channels is proposed. The information source emits bits ???0??? and ???1??? with unequal probabilities. The unbalanced source distribution is used as a priori known signal structure at the receiver for channel estimation. Compared to pilot-symbol-assisted channel estimation, the proposed channel estimation technique can achieve a superior receiver bit error rate performance, especially at low signal to noise ratio conditions.

Identiferoai:union.ndltd.org:ADTP/257604
Date January 2006
CreatorsSadeghi, Parastoo, School of Electrical Engineering And Telecommunications, UNSW
PublisherAwarded by:University of New South Wales. School of Electrical Engineering And Telecommunications
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsCopyright Parastoo Sadeghi, http://unsworks.unsw.edu.au/copyright

Page generated in 0.0011 seconds