The thesis concerns the problem of interference modelling for xDSL technologies and Ethernet. The introduction describes the origin of crosstalk, that arise during the operation of the systems and the physical properties of the lines, therefore, the next section describes the properties of the primary and secondary parameters of the homogenous line and their modelling. In order to achieve higher data rates on the metallic line, systems with larger frequency spectrum are applied, resulting in a greater attenuation of the line. This issue and the characteristics determination of the transmission systems are subjects of the mathematical models, which are divided according to the modelling of primary or secondary parameters. The main goal of this work is to describe the effects which influence the performance of data transfer via xDSL and Ethernet technology focusing on internal and external disturbances acting on the cable lines. This is the crosstalk at the near and far end, adaptive white noise, radio frequency interference RFI and impulse noise. Following part of the thesis deals with the properties of xDSL technologies, specifically ADSL2+ and VDSL2 and Ethernet. Another aim is to design applications which enable to test the performance of xDSL and Ethernet transmission systems with its own award simulations interference. The conclusion describes the design and implementation of laboratory experiments for measuring of the efficiency and spectral properties of xDSL. The proposed laboratory protocols are annexed to this thesis, including the measured waveforms.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:220322 |
Date | January 2013 |
Creators | Novotný, František |
Contributors | Mišurec, Jiří, Zeman, Václav |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0025 seconds