This study demonstrates an experimental investigation into the efficacy of a novel surface pre-treatment technique to improve the toughness and energy dissipation of composite CFRP T-joints. This novel technique optimizes CO2 laser irradiations to remove surface contaminations and modify the surface morphology of CFRP T-joint adherents. Pull-off tests were performed on T-joints that experienced peel-ply (PP) treatment and to those that were ablated with 10% (LC) and 30% (LA) laser power respectively. A further developed alternative pattern between LA and LC surface pre-treatment was examined. Two different quasi-isotropic stacking sequences have been studied by having surface fibers aligned in 0° and 45° direction. A series of surface roughness analysis, optical microscopy, SEM, CT scan and pictorial findings have been carried out to characterize the surface morphologies and failure modes prior to and after the failure. The patterning technique promoted non-local damage mechanisms which resulted in large improvements in the toughness and energy dissipation as compared to the other pre-treatment techniques. Up to ~12 times higher energy dissipation compared to peel-ply pre-treated T-joint were achieved with patterned T-joint structures that are stacked with a 0° surface fiber direction.
Identifer | oai:union.ndltd.org:kaust.edu.sa/oai:repository.kaust.edu.sa:10754/669124 |
Date | 06 April 2021 |
Creators | Hashem, Mjed H. |
Contributors | Lubineau, Gilles, Physical Science and Engineering (PSE) Division, Anthopoulos, Thomas D., Laquai, Frédéric, Wagih, Ahmed |
Source Sets | King Abdullah University of Science and Technology |
Language | English |
Detected Language | English |
Type | Thesis |
Rights | 2022-05-06, At the time of archiving, the student author of this thesis opted to temporarily restrict access to it. The full text of this thesis will become available to the public after the expiration of the embargo on 2022-05-06. |
Page generated in 0.0997 seconds