Return to search

Kinetic Modeling of the Adsorption of Mercury Chloride Vapor on Spherical Activated Carbon by Thermogravimetric Anaylysis

This study investigated the adsorptive capacity and isotherm of HgCl2 onto spherical activated carbons (SAC) via thermogravimetric analysis (TGA). Activated carbon injection (ACI) is thought as the best available control technology (BACT) for mercury removal from flue gas. There are two major forms of vapor-phase mercury, Hgo and Hg2+, of which HgCl2 accounts for 60-95% of total mercury. Mercury emitted from the incineration of municipal solid wastes (MSW) could cause severely adverse effects on human health and ecosystem since it exists mainly in vapor phase due to high vapor pressure. Although the adsorptive capacity of HgCl2 onto activated carbon has been studied in previous adsorption column tests, only a few studies have thoroughly investigated the adsorption isotherms of HgCl2 onto SAC.
Equilibrium and kinetic studies are important towards obtaining a better understanding of mercury adsorption. Many investigations have addressed the relationship between sorption kinetics and equilibrium for different adsorbent/adsorbate combinations. For the removal of vapor-phase mercury, several bench-pilot, and full-scale tests have be proceeded to examine the influence of carbon types, carbon structures, carbon surface characteristics, injection methods (dry or wet), amount of carbon injected, and flue gas temperature on mercury removal. In addition, the dynamics of spherical activated carbons (SAC) adsorbers for the uptake of gas-phase mercury was evaluated as a function of temperature, influent concentration of mercury, and empty-bed residence time. However, only a few studies investigated the adsorption isotherms of HgCl2 onto activated carbons.
In this study, TGA was applied to obtain the adsorptive capacity of HgCl2 onto SAC with adsorption temperature (30~150oC) and influent HgCl2 concentration (50~1,000£gg/m3). Experimental results indicated that the adsorptive capacity of HgCl2 onto SAC was 0.67and 0.20 mg/gC at 30¡B70 and 150oC, respectively. This study investigated the adsorptive capacity of HgCl2 vapor onto SAC via TGA analysis. Experimental results indicated that the adsorptive capacity of SAC decreased with the increase of the adsorption temperature. Furthermore, the results suggested that that the adsorption of SAC on HgCl2 vapor was favorable equilibrium at 30 and 70¢J and unfavorable equilibrium at 150¢J. In comparison of the experimental data with isotherm equations, Freundlich isotherm fitted the experimental results better than Langmuir isotherm. The model simulations were found to fit very well to the high concentration experimental kinetic data for both adsorption and desorptionusing two adjust parameter, effective diffusivity, and the Freundlich isothermexponent.¡@The extracted model parameter, effective diffusivity and n, were then used to predict the experimental kinetic data for the same combination at other concentrations.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0825104-153820
Date25 August 2004
CreatorsCHEN, WEI-CHIN
ContributorsChing Yuan, Chin-Huang Weng, Chung-Shin Yuan, Tsair-Fuh Lin, Ming-Shean Chou
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0825104-153820
Rightsunrestricted, Copyright information available at source archive

Page generated in 0.0023 seconds