Includes bibliographical references. / This thesis deals with a system that reduces the oncoming boundary layer displacement thickness in a wind tunnel. The device is then used to examine the effect that this boundary layer has on the aerodynamic drag of a standard truck, which is classified as a bluff body with a high ground clearance and the same truck fitted with skirts all round, which is then classified as a bluff body with a low ground clearance. To gain insight into this field of industrial aerodynamics, an extensive literature survey was done in which all the relevant SAE papers onwards from the late sixties were studied and summarised in the first section of this report. The second section deals with a system that can limit the boundary layer displacement thickness in the test section of the 3/4 open jet wind tunnel. Through investigations and an extensive literature research a suction device was designed and built. This boundary layer removal system was then tested to ensure that the main flow indicators are not influenced by the suction and thus lie within internationally accepted limits. Included in this section are a description of the truck model and the other instruments or devices used to complete the testing. The third section deals with the aerodynamic drag experienced by the bluff body with a high ground clearance. Included in the third section is an investigation that deals with the aerodynamic drag of the same truck model, when skirting has been added which considerably lowers the ground clearance. The results obtained from the above investigations indicate that the drag of the Ground Simulation model without skirts is increased by about 3.8% with the removal of the boundary layer and up to 10% for the model with the skirts. It is thus shown that the farther the object protrudes into the boundary layer, the larger the increase in drag will be once this boundary layer has been removed. These figures were obtained from testing the model at 22.2m/s free stream velocity and a 6mm wheel-ground clearance, with the wheels rotating.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/17542 |
| Date | January 1997 |
| Creators | Lutz, Thomas |
| Contributors | Sayers, Anthony |
| Publisher | University of Cape Town, Faculty of Engineering and the Built Environment, Department of Mechanical Engineering |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Master Thesis, Masters, MSc |
| Format | application/pdf |
Page generated in 0.0024 seconds