In this thesis, an aeroservoelastic test appratus is designed to investigate the flutter phenomena in a low speed wind tunnel environment. Flutter is an aeroelastic instability that may occur at control surfaces of aircrafts and missiles. Aerodynamic, elastic, and inertial forces are involved in flutter. A mathematical model using aeroelastic equations of motion is derived to investigate flutter and is used as a basis to design the test setup. Simulations using this mathematical model are performed and critical flutter velocities and frequencies are found. Stiffness characteristics of the test setup are determined using the results of these simulations. The test setup is a two degrees of freedom system, with motions in pitch and plunge, and is controlled by a servomotor in the pitch degree of freedom. A NACA 0012 airfoil is used as a control surface in the test setup. Using this setup, the flutter phenomena is generated in Ankara Wind Tunnel (AWT) and experiments are conducted to validate the results of the theoretical aeroelastic mathematical model calculations.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12607034/index.pdf |
| Date | 01 February 2006 |
| Creators | Unal, Sadullah Utku |
| Contributors | Balkan, Tuna |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0022 seconds