An uninhabited aero vehicle platform design is presented. This encompasses the landing gear system and the structures of the vehicle. The landing gear system consisted of the design, construction and testing of the main and nose gears. The testing of the landing gear resulted in a valid system that could then be integrated into the vehicle. The vehicle structures are composed of various configurations of composite sandwiches. Extensive material testing was conducted to experimentally produce the physical properties of the materials. These properties and techniques can be utilized by other vehicle designs. The structural design was refined and ultimately verified within a finite element analysis program, ANSYS. This analysis implemented a composite shell element that utilized all of the material properties gained from the material testing. This work resulted in an analyzed and constructed vehicle. Ultimately the vehicle was load tested to verify the analytical results.
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-12302003-185053 |
| Date | 31 December 2003 |
| Creators | Burgun, Robert Scott |
| Contributors | Dr. James Selgrade, Dr. Eric Klang, Dr. Charles E. Hall Jr |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-12302003-185053/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0017 seconds