The dissertation thesis is focused on non-transparent ventilated façade constructions, airflow in the ventilated cavity and the building envelope temperatures in relation with the different parameters of the construction and the ventilated cavity. The aim of this work is to optimize the temperature behavior of the building envelope during the summer season when the overheating is the most distinctive. The numerical and experimental methods with many different variants of façade constructions were used to investigation. The variants were compared and evaluated by the measured values of airflow speed in the ventilated cavity, temperature in the ventilated cavity and on the surfaces of constructions around the cavity. The result of the investigation is the evaluation of the influence of the airflow resistances or the reflectance of the surfaces around the ventilated cavity. Part of the thesis was formulated in relation with the project of MPPF - Multifunctional Plug & Play Facade during the internship at TU Graz. The efficiency of some parts of the energy active façade in this project depends on the temperature. The part of the results is the patented passive system for ventilation of building envelope and the patented cavity panel for ventilated facades.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:355607 |
| Date | January 2017 |
| Creators | Šagát, Erik |
| Contributors | Chybík,, Josef, Bura,, Roman, Matějka, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds