This work solves creation of calibration relations to determine cube compressive strength, dynamic and static elastic modulus of alkali-activated concrete by non-destructive methods. Alkali-activated concrete is spoken of as a new material used in civil engineering. It shows different properties than normal concrete based on Portland cement. That's why the modification of common calibration relation seems necessary. Fresh concrete was made in the concrete plan ŽPSV a.s., Uherský Ostroh in three mixtures and always in the number of 18 cubes and 3 prisms. The samples were tested by impact hammer Schmidt type L, type N, SilverSchmidt PC-N and by ultrasound in 6 time periods of three specimens. After that, the cube compressive strength was determined. Status of static elastic modulus was determined in a time period of 28 days. The results are calibration relations to determine the progress of compressive strength and modulus of elasticity for each method and their combination.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:226970 |
| Date | January 2014 |
| Creators | Vrba, Pavel |
| Contributors | Kocáb, Dalibor, Bílek, Vlastimil |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds