The objective of the study was to investigate the air pollution of working place and the fence of aluminum plants. Four sites were selected for conducting the sampling of particulate matter¡]PM¡^to establish the fingerprints of PM in aluminum plants. Moreover, the receptor model was used to apportion the major contributing sources of particulate matter.
The results of the study showed that PM concentrations in the working places were high, which might be emitted from manufacturing or mechanical operating process in the melting furnace, the continuous casting, and etc. The total suspended solid concentrations from non-combustion pollution source ¡]such as hot rolling , cold rolling, and plate industry¡^ were usually below 200 µg /m3. Moreover, the size distributions of PM in working places were usually bi-modal type. The particle sizes with the highest concentration in five and coarse fractions were 0.18~0.56 µm respectively. As for the combustion sources, the particle sizes with the highest concentration were 0.56~1.0 µm and 11.5~24.7 µm, respectively. The particle emitted from zinc casting source were mostly in the fine particle fraction¡]1.0~3.2 µm¡^.
The fingerprint profiles of PM from the working places showed that the major metal content of the hot rolling were Al, Zn, K, Cr. Among then, Cr might be source of from the using of chromate acid. The most abundant water-soluble ions were sulfate ion and chlorine and chloride. The carbon content accounted for about 22% of the PM mass. The ratio of organic carbon to elemental carbon were 2.54 and 2.80. The major metal content of melting process was Al, the minor metals were Zn, k, Ca, Fe. The ratio of anion to cation¡]A/C¡^ was about 0.80. The most abundant ion sulfate, while the chloride, the fluoride, potassium, and the ammonium ions were minor ones. The carbon content accounted about 19.2% and 27.3% of PM mass respectively. The ratio of organic carbon to elemental carbon were 1.21 and 1.07. Moreover, the major metals were k, Ca, Fe. The major ion was chloride, while the nitrate calcium and potassium ions were minor ones. The A/C was 0.7. The carbon content accounted for 54.8% and 51.0% of PM2.5 and PM10, respectively. The ratio of organic carbon to elemental carbon was about 2.9.
The results obtained from receptor modeling showed that the contribution percentage of fugitive PM from the aluminum plant (including hot rolling, melting furnace, and low-wave furnace) was between 5.9 and 13.2%, Another major source was traffic refracted pollution with a contribution percentage between 17.0% and 23.0%, Fur then more, in the surrounding PM, was between 11.2% and 20.7%, while the contribution from the steel plant and Moreover, the municipal incineration was 2.5~6.5% and 2.3~5.0%,respectively. The sea salt contributed 4.3~7.1% of PM mass. The unsolved percentage was 7.0~11.8%.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0827104-101741 |
Date | 27 August 2004 |
Creators | hwang, ming-her |
Contributors | none, none, none, none |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0827104-101741 |
Rights | campus_withheld, Copyright information available at source archive |
Page generated in 0.0019 seconds