Human brain and related topics like neuron spikes and their active potentials have become more and more attractive to people these days, as these issues are extremely helpful for curing many neural injuries and cognitive diseases. One method to discover this field is by designing a chip embedded in brains with probes to actual neurons. It is obvious that batteries are not practical for these applications and thereby RF radiation is used as power sources, revealing that chips should operate under a very low power supply. Since neural signals are analog waveforms, analog-to-digital converter (A/D converter, ADC) is the key component in a neural recorder chip.
This thesis proposes the complete design of a low power 8-bit successive approximation register (SAR) A/D converter for use in a wireless neural recorder chip, realizing the function of digitizing a sampled neural signal with a frequency distribution of 10Hz to 10kHz. A modified energy-saving capacitor array in the SAR structure is provided to help save power dissipation. Therefore, the ADC shall operate within a power budget of 20μW maximum from a 1V power source, at a clock frequency of 500kHz corresponding to a conversion rate of 55.5-kS/s. All the circuits are designed and implemented based on the IBM/Global Foundries 8HP 130nm BiCMOS technology. Simulations of schematic and layout versions are done respectively to verify the functionality, linearity and power consumption of the ADC.
Key words: Successive approximation register analog-to-digital converter (SAR-ADC), low power design, energy-saving capacitor array, neural recorder applications
| Identifer | oai:union.ndltd.org:bu.edu/oai:open.bu.edu:2144/23685 |
| Date | 10 July 2017 |
| Creators | Yang, Jiao |
| Source Sets | Boston University |
| Language | en_US |
| Detected Language | English |
| Type | Thesis/Dissertation |
Page generated in 0.0021 seconds