This thesis designs new methods for Q tomography and Q-compensated prestack depth migration when the recorded seismic data suffer from strong attenuation. A motivation of this work is that the presence of gas clouds or mud channels in overburden structures leads to the distortion of amplitudes and phases in seismic waves propagating inside the earth. If the attenuation parameter Q is very strong, i.e., Q<30, ignoring the anelastic effects in imaging can lead to dimming of migration amplitudes and loss of resolution. This, in turn, adversely affects the ability to accurately predict reservoir properties below such layers.
To mitigate this problem, I first develop an anelastic least-squares reverse time migration (Q-LSRTM) technique. I reformulate the conventional acoustic least-squares migration problem as a viscoacoustic linearized inversion problem. Using linearized viscoacoustic modeling and adjoint operators during the least-squares iterations, I show with numerical tests that Q-LSRTM can compensate for the amplitude loss and produce images with better balanced amplitudes than conventional migration.
To estimate the background Q model that can be used for any Q-compensating migration algorithm, I then develop a wave-equation based optimization method that inverts for the subsurface Q distribution by minimizing a skeletonized misfit function ε. Here, ε is the sum of the squared differences between the observed and the predicted peak/centroid-frequency shifts of the early-arrivals. Through numerical tests
on synthetic and field data, I show that noticeable improvements in the migration image quality can be obtained from Q models inverted using wave-equation Q tomography. A key feature of skeletonized inversion is that it is much less likely to get stuck in a local minimum than a standard waveform inversion method.
Finally, I develop a preconditioning technique for least-squares migration using a directional Gabor-based preconditioning approach for isotropic, anisotropic or anelastic least-squares migration. During the least-squares iterations, I impose sparsity constraints on the inverted reflectivity model in the local Radon domain. The forward and the inverse mapping of the reflectivity to the local Radon domain is done through 3D Fourier-based discrete Radon transform operators. Using numerical tests on synthetic and 3D field data, I demonstrate that the proposed preconditioning approach can discriminate against artifacts in the image resulting from irregular or insufficient acquisition and can produce images with improved signal-to-noise ratio when compared with standard migration.
| Identifer | oai:union.ndltd.org:kaust.edu.sa/oai:repository.kaust.edu.sa:10754/605856 |
| Date | 03 1900 |
| Creators | Dutta, Gaurav |
| Contributors | Schuster, Gerard T., Physical Science and Engineering (PSE) Division, Williamson, Paul, Alkhalifah, Tariq Ali, Peter, Daniel, Wu, Ying, Turkiyyah, George M. |
| Source Sets | King Abdullah University of Science and Technology |
| Language | English |
| Detected Language | English |
| Type | Dissertation |
| Rights | 2016-04-18, At the time of archiving, the student author of this dissertation opted to temporarily restrict access to it. The full text of this dissertation became available to the public after the expiration of the embargo on 2016-04-18. |
Page generated in 0.0021 seconds