A completely satisfactory water distribution network should fulfill its basic requirements such as providing the expected quality and quantity of water with the desired residual pressures during its lifetime.
A water distribution network should accommodate the abnormal conditions caused by failures. These types of failures can be classified into two groups / mechanical failures and hydraulic failures. Mechanical failure is caused due to malfunctioning of the network elements such as pipe breakage, power outage and pump failure. On the other hand, hydraulic failure, considers system failure due to distributed flow and pressure head which are inadequate at one or more demand points.This study deals with the calculation of the hydraulic system reliability of an existing water distribution network regarding the Modified Chandapillai model while calculating the partially satisfied nodes.
A case study was carried out on a part of Ankara Water Distribution Network, N8-1. After the modeling of the network, skeletonization and determination of nodal service areas were carried out. The daily demand curves for the area were drawn using the data that were taken from SCADA of the water utility. The daily demand curves of different days were joined and one representative mean daily demand curve together with the standard deviation values was obtained. The friction coefficient values of the pipes and storage tank water elevation were taken as other uncertainty parameters for the model. Bao and Mays (1990) approach were carried together with the hydraulic network solver program prepared by Nohutcu (2002) based on Modified Chandapillai model. The sensitivity analysis for the effects of system characteristics and model assumptions were carried out to see the effects of the parameters on the calculations and to investigate the way of improving the hydraulic reliability of the network.
The storage tank should be located at a higher level for improving the reliability of the network. Also having the storage tank water level nearly full level helps in improving the reliability in daily management. Moreover, the hydraulic system reliability is highly dependent on the pumps as the lowest reliability factors were the ones with the no pump scenarios. Determining the required pressures for nodes are very important since they are the dominant factors that effects the reliability calculations. On the other hand, friction coefficient parameters and type of probability distribution function do not have dominant effect on the results. Results of this study were helpful to see the effects of different parameters on the hydraulic reliability calculations and for assessment of the methods for improving the reliability for the network.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/1088954/index.pdf |
Date | 01 January 2003 |
Creators | Misirdali, Metin |
Contributors | Merzi, Nuri |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | M.S. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.0018 seconds