Biomass is an important source of energy and the most important fuel worldwide after coal, oil and natural gas. Biomass does not add carbon dioxide to the atmosphere as it absorbs the same amount of carbon in growing as it releases when consumed as a fuel. Its advantage is that it can be used to generate electricity with the same equipment or power plants that are now burning fossil fuels. However, the low energy density of the biomass requires developments and advances in conversion technologies in order to increase process efficiency and reduce pollution. One of the most promising converting methods for treatment of biomass and waste feedstock is gasification. In this study a highly preheated air/steam of temperatures >800oC is introduced to the gasifier which is fed with wood pellets’ feeding rate 40-50 kg/h. The system is redesigned to work as a continuous type updraft HTAG. The aim of the studies was to test the performance of an Updraft configuration in various operating conditions using Biomass (wood pellets) as the feedstock, and facing primarily technological difficulties and process limitations. Determining the Temperature distribution along the reactor and synthesis gas composition of the process are reported for various operating parameters. During the experiment it is observed that the introduction of more steam flow rate increases the LHV (lower heating value) of the synthesis gases. Three case studies (Case1, Case2, and Case3) are conducted, each case having different biomass feeding rate, steam flow rate and process air flow rate. The result show that the amount of LHV of gas varied from 3 to 4.2 MJ/Nm3, the H2: CO ratio is between 0.5-0.9 and the CO/CO2 ratio has range 1.0-1.7. Case 3, in which 40 kg/h biomass feeding rate and 80 kg/h Steam flow rate is maintained gives High LHV, high H2/CO ratio and more CO/CO2 ratio among the rest case studies. Further improvement can be done within the reactor, increase in retention time and variation of more parameters can examine, in order to get the optimum result in future.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-119835 |
Date | January 2013 |
Creators | Arif, Muhammad Jalil |
Publisher | KTH, Materialvetenskap |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0076 seconds