This report presents concepts for a planar active electronically scanned antenna(AESA). The goal of the project was to devlop a low-weight, low profile, thin, S-band antenna with wide-scan angle capabilities. In the final concept the service aspects of the T/R-modules was also taken into acount in order to allow easy and fast replacements of these components. The antenna was designed and optimised using the commercial software Ansoft HFSS. A prototype of the antenna was constructed and later measured and verified. The final concept is a 2m×2m antenna with an estimated weight of around 320 kg, around 11 cm thick (where the thickness of the antenna element is 1.76 cm) and has a maximum scan angle range of more than 45 degrees (with <–10dB active reflection) in the frequency band 3–3.5 GHz.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-126302 |
| Date | January 2010 |
| Creators | Dalevi, Mathias |
| Publisher | Uppsala universitet, Institutionen för fysik och astronomi |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | UPTEC F, 1401-5757 ; 10 020 |
Page generated in 0.0021 seconds