Thesis (MEng)--University of Stellenbosch, 2001. / ENGLISH ABSTRACT: Balanced loads such as antennas normally require baluns when they are measured. For
wide band applications, designing and building a balun complicates the measurement and
introduces errors. A simple model for load impedances was developed, together with a
novel measurement procedure. The procedure enables the measurement of balanced loads
using a network analyzer with no balun. Measured and simulated results are presented. / AFRIKAANSE OPSOMMING: Gebalanseerde laste soos antennas benodig gewoonlik balons om korrek gemeet te word.
Die ontwerp van 'n balon vir wye band toepassings bemoeilik die metings en veroorsaak
foute. 'n Eenvoudige model vir die lasimpedansies is ontwikkel sowel as 'n eenvoudige
meetmetode. Die metode word gebruik om die gebalanseerde laste te meet met 'n netwerk
analiseerder sonder die gebruik van 'n balon. Gemete en gesimuleerde resultate word
getoon.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/52451 |
| Date | 04 1900 |
| Creators | Van Rooyen, M. W. (Melchior Werner) |
| Contributors | Palmer, K. D., Stellenbosch University. Faculty of Engineering. Dept. of Electrical and Electronic Engineering. |
| Publisher | Stellenbosch : Stellenbosch University |
| Source Sets | South African National ETD Portal |
| Language | en_ZA |
| Detected Language | Unknown |
| Type | Thesis |
| Format | 59 p. : ill. |
| Rights | Stellenbosch University |
Page generated in 0.002 seconds