Return to search

Model-based pre-distortion for Signal Generators

Spectrally pure signals are an indispensable requirement when the Signal Generator (SG) is to be used as part of a test bed. However, even sophisticated equipment may not comply with the needs imposed by certain applications. This work approaches the problem by using Digital Pre-Distortion (DPD) based on a polynomial memory-less model obtained for the SG. Using the SG in arbitrary mode (ARB) an input signal is computer-generated and reproduced by the SG. Measurement accuracy is ensured using coherence sampling and grid matching to the Signal Analyzer (SA). Finally, careful time alignment is used to compare the transmitted and received three-tone signals to obtain the polynomials coefficients. Results show that the accuracy of the model and the effectiveness of pre-distortion may vary depending on the amplitude of the three-tone signal. However, using polynomials of 5th and 9th degrees up to 15dB reduction of the 3rd order Inter-Modulation products can be obtained, and spurious powers may be lowered down to 70dBc.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hig-231
Date January 2007
CreatorsLuque, Carolina
PublisherHögskolan i Gävle, Institutionen för teknik och byggd miljö
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0017 seconds