This thesis investigates the design and the performance of low-power microsensors that communicate directly to a satellite or a constellation of satellites. Information is spread using pseudo noise (PN) or Barker codes. The sensors use a single circular microstrip patch element with a wide beamwidth or a miniature phased array antenna that continuously scans to access the satellite(s). The array beam is controlled with a beam-forming network (BFN), which contains 3 or 4-bit phase shifters, which can be made in micro-electro-mechanical systems (MEMS) or in monolithic microwave integrated circuits (MMIC). The antennas are designed using array simulation program called 'ARRAY' and the results are used in another simulation program called Advanced Design System (ADS) to simulate the whole sensor package that uses one of the antennas. The simulation results show that a sensor as small as 2.35 cm in diameter is able to send information with data rate of 1 kbps at bit error rate less than 10?? to low-earth orbit (LEO) satellites with a transmitted power of 27.5 microwatts (-15.6 dBm). / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/76907 |
Date | 19 January 2008 |
Creators | Al-Saleh, Mohammad |
Contributors | Electrical and Computer Engineering, Zaghloul, Amir I., DaSilva, Luiz A., Midkiff, Scott F. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Language | en_US |
Detected Language | English |
Type | Thesis, Text |
Format | application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0013 seconds