Return to search

Read/write assist circuits and SRAM design

This report discusses the design of read/write assist circuits which are used in a SRAM cell’s design to overcome the cell’s variations. It also explains the variability problems in a SRAM bit-cell and many approaches to address them. The basic operations, SNM concept, and write margin of an SRAM are described theoretically as well as measured in simulation. The write assisted circuit, the Negative Bit-line Voltage Bias scheme, is discussed and implemented at transistor level using a six-transistor (6T) SRAM cell. With the write assisted circuit, the implemented memory array successfully performs a write operation at 0.6V and -25°C, the condition in which the same operation would fail without the write assisted circuit. During the simulation, this write assisted circuit helps to achieve the negative bias voltage of -70mV on the SRAM’s bit-lines. The cost overhead includes chip area, power consumption, and current leakage when this Negative Bit-line Voltage scheme is implemented. / text

Identiferoai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2009-12-692
Date23 September 2010
CreatorsNguyen, Quocdat Tai
Source SetsUniversity of Texas
LanguageEnglish
Detected LanguageEnglish
Typethesis
Formatapplication/pdf

Page generated in 0.002 seconds