<p>The interaction of carboxylic acids with copper is a phenomenon found both outdoors and, more commonly, indoors. The influence on copper of some carboxylic acids (formic, acetic, propionic, and butyric) have so far been studied at concentrations levels at least three or four orders of magnitude higher than actual indoor conditions (< 20 ppb, volume parts per billion), and with only limited emphasis on any mechanistic approach. In this licentiate study a unique analytical setup has been successfully applied for <i>in situ </i>characterization and quantification of corrosion products formed during initial atmospheric corrosion of copper in the presence of acetic, formic or propionic acid. The setup is based on monitoring mass changes by the quartz crystal microbalance (QCM) and simultaneously identifying the chemical species by infrared reflection-absorption spectroscopy (IRAS). Post-analysis of corrosion products was performed by coulometric reduction (mass of copper (I) oxide formed), grazing incidence x-ray diffraction (phase identification) and atomic force microscopy (surface topography).</p><p>The absolute amounts of mass of individual constituents in the corrosion products, mainly copper (I) oxide or cuprite, copper (II) carboxylate and water or hydroxyl groups, have been deduced<i> in situ</i> during exposure in 120 ppb of carboxylic acid concentration, 95% relative humidity and 20ºC. An overall result is the consistency of analytical information obtained. For copper (I) oxide the quantified data estimated from IRAS, QCM or coulomeric reduction agrees with a relative accuracy of 12 % or better.</p><p>The interaction of copper with the carboxylic acids seems to follow two spatially separated main pathways. A proton-induced dissolution of cuprous ions followed by the formation of copper (I) oxide, and a carboxylate-induced dissolution followed by the formation of copper (II) carboxylate. The first pathway is initially very fast but levels off with a more uniform growth over the surface. This pathway dominates in acetic acid. The second pathway exhibits a more constant growth rate and localized growth, and dominates in formic acid. Propionic acid exhibits low rates for both pathways. The difference between the carboxylic acids with respect to both total corrosion rate and carboxylate-induced dissolution can be attributed to differences in acid dissociation constant and deposition velocity.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:kth-4391 |
| Date | January 2007 |
| Creators | Gil, Harveth |
| Publisher | KTH, Chemistry, Stockholm : Kemi |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Licentiate thesis, comprehensive summary, text |
| Relation | Trita-CHE-Report, 1654-1081 ; 2007:21 |
Page generated in 0.0024 seconds