Speciation analysis of arsenic based on selective hydride generation and detection by atomic fluorescence spectrometry have been studied in this work. It was found that under optimum conditions of atomization in the flame in gas shield atomizer, sensitivity was approximately twice higher and detection limit was about four times lower compared to miniature diffusion flame, which is a standard atomizer for atomic fluorescence spectrometry. The conditions to generate hydrides from both inorganic forms of the arsenic, i.e. from arsenite and arsenate, with the same efficiency have been found in the batch arrangement, by using 1 mol dm-3 hydrochlorid acid and 1% solution of tetrahydridoborate. To determine only trivalent form, TRIS buffer at pH 6.00 was used together with 1% sodium tetrahydridoborate. The detection limits found for inorganic arsenic, i.e. for arsenite and arsenate, respectively, were 15 ng dm-3 and 9 ng dm-3 . It was found that in the batch arrangement under these conditions it is possible to generate corresponding hydrides methylarsonate and dimethylarsonate with the same efficiency as from the inorganic form. Finally, it was found when slightly changing the gas-liquid separator design in order to introduce the mixture of tetrahydridoborate with hydrochloric acid to the bottom of the...
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:324639 |
Date | January 2013 |
Creators | Marschner, Karel |
Contributors | Dědina, Jiří, Komárek, Josef |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds