The aim of this work is to design an architecture of the embedded device that will be used for controlling DAW software in recording studio. First of all, attention is given to a brief summary of the necessary knowledge which is needed to design such kind of device. Af- ter that follows short survey of the existing solutions and description of protocols which can be used for communication with the recording software. Then, subsequent part of the thesis builds upon these foundations and further elaborates the device architecture by me- ans of decomposing it into several modules. In fact, two hardware modules are designed and manufactured, when each of them is conceived on a separate PCB with its own microcon- troller. Then the control firmware has been implemented for each of the modules. At the end of the work an aluminium enclosure, which holds both modules, is designed. The result of this work is a functional prototype of the assembled controller which can be used for the purpose of controlling DAW software.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:399180 |
| Date | January 2019 |
| Creators | Svoboda, Tomáš |
| Contributors | Jaroš, Jiří, Šimek, Václav |
| Publisher | Vysoké učení technické v Brně. Fakulta informačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0082 seconds