This thesis deals with influences of graded deformations, temperatures and holding times on the grains and subgrains size in steel 08Cr18Ni10T. In literary part of the thesis there are described static and dynamic annealing treatments, then also austenitic stainless steels and some selected types of their processing. In experimental part there is studied grain size on differently deformed samples annealed in temperature range 1050–1200 °C for 10, 50 and 100 minutes. Analysis of present structures units was perform by EBSD. Except of that, there were realized chemical analysis of selected inclusions and also hardness test were realised. Achieved measurement shown, that grain size of chosen steel is depended on all 3 variable values.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400423 |
Date | January 2019 |
Creators | Čech, Jan |
Contributors | Gregor, Martin, Foret, Rudolf |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds