With the increase in electronic equipment implemented in various systems, as well as the increase in calculating power that these devices offer, designers are being empowered to make use of this power in real-time systems to diagnose and protect the systems themselves. This reasoning is too compounded by the focus on efficiency and safety in the design of complex systems, as well as the increasing expense and sensitivity of the electronic components themselves. With this in mind, this dissertation aims at developing a comprehensive measurement, control and reaction system for the electrical diagnosis and ultimately optimisation of complex electrical and electronic systems. This system will serve as a real-time diagnosis tool, which will enable the real-time diagnosis of various components in an electro-mechanical system, which can then be interpreted to determine the working state of the various components. Another sphere of this project will involve the accurate monitoring of the battery status as well as actively balancing the series connected batteries. The focus on the batteries will seek to prolong the life of the batteries, while being able to squeeze as much capacity out of them. The initial design and testing will be based on an AGV system implemented at VWSA, however a main goal throughout the design process will be modularity, i.e. the ease of implementation of this system in other systems. The key technologies used in the development of this system will still comprise of the components used in the original AGV, however new prototype components sourced from Microcare are used for the battery management system, while current sensors directly connected to the PLC’s analog input ports will be used for the active monitoring of currents distributed through the AGV.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:20681 |
Date | January 2016 |
Creators | Church, Stuart Michael |
Publisher | Nelson Mandela Metropolitan University, Faculty of Engineering, the Built Environment and Information Technology |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis, Masters, MEng |
Format | xvii, 142 leaves, pdf |
Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0016 seconds