Modern civil structures as well as loads on them are still too complex to be accurately modeled or simulated. Therefore, structural failures and structural defects are NOT uncommon! More and more full-scale structural monitoring systems have been deployed in order to monitor how structures behave under various loading conditions. This research focuses on how to maximise benefits from such full-scale measurements by employing advanced digital signal processing techniques. This study is based on accelerometer and GPS data collected on three very different structures, namely, the steel tower in Tokyo, the long and slender suspension bridge in Hong Kong, and the tall office tower in Sydney, under a range of loading conditions, i.e., typhoon, earthquake, heavy traffic, and small scale wind. Systematic analysis of accelerometer and GPS data has demonstrated that the two sensors complement each other in monitoring the static, quasi-static and dynamic movements of the structures. It has also been confirmed that the Finite Element Model could under-estimate the natural frequencies of structures by more than 40% in some case. The effectiveness of using wavelet to de-noise GPS measurement has been demonstrated. The weakness and strengths of accelerometer and GPS have been identified and framework has been developed on how to integrate the two as well as how to optimize the integration. The three-dimensional spectral analysis framework has been developed which can track the temporal evolution of all the frequency components and effectively represents the result in the 3D spectrogram of frequency, time and magnitude. The dominant frequency can also be tracked on the 3D mesh to vividly illustrate the damping signature of the structure. The frequency domain coherent analysis based on this 3D analysis framework can further enhance the detection of common signals between sensors. The developed framework can significantly improve the visualized performance of the integrated system without increasing hardware costs. Indoor experiments have shown the excellent characteristics of the optical fibre Bragg gratings (FBGs) for deformation monitoring. Innovative and low-cost approach has been developed to measure the shift of FBG???s central wavelength. Furthermore, a schematic design has been completed to multiplex FBGs in order to enable distributed monitoring. In collaboration with the University of Sydney, the first Australian full-scale structural monitoring system of GPS and accelerometer has been deployed on the Latitude Tower in Sydney to support current and future research.
| Identifer | oai:union.ndltd.org:ADTP/242967 |
| Date | January 2006 |
| Creators | Li, Xiaojing, School of Electrical Engineering & Telecommunications & School of Surveying & Spatial Information Systems, UNSW |
| Publisher | Awarded by:University of New South Wales. School of Electrical Engineering and Telecommunications & School of Surveying and Spatial Information Systems |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Xiaojing Li, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0021 seconds