Return to search

Settling Time Measurement Techniques Achieving High Precision at High Speeds

Settling time is very important for data acquisition systems because it is the primary factor that defines the data rate for a given error level. Therefore settling time measurement is a crucial test. The goal of the project was to design, test and compare different measurement techniques. Three methods were tested to the accuracies of 0.1% and 0.01%. Also simulations were conducted to explain the parameters that affect the settling behavior. Additionally bench measurements were correlated to simulation results. This report is intended as a guide for settling time measurements.

Identiferoai:union.ndltd.org:wpi.edu/oai:digitalcommons.wpi.edu:etd-theses-1736
Date05 May 2005
CreatorsKayabasi, Cezmi
ContributorsJohn A. McNeill, Advisor, Donald Richard Brown III, Committee Member, Stephen J. Bitar, Committee Member
PublisherDigital WPI
Source SetsWorcester Polytechnic Institute
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceMasters Theses (All Theses, All Years)

Page generated in 0.0015 seconds