Return to search

Modeling, simulation, hardware development, and testing of a lab-scale airborne wind energy system

Airborne Wind Energy Systems (AWES) harness the power of high-altitude winds using tethered planes or kites. Continuous and reliable operation requires that AWES become autonomous devices, but the wind intermittency forces the system to repeatedly take-off to start, and land to shut-off. Therefore, a common approach to facilitate the operation is implementing Vertical take-off and landing (VTOL) functionality. This thesis models and simulates AWES flights working towards the implementation of flight controller hardware and autonomous operation of an AWES demonstrator platform.

The Ardupilot open-source autopilot platform provides a convenient tool for modeling, simulation, and hardware implementation of small-scale airplanes. An AWES lab-scale demonstrator was developed to obtain operational insight, get preliminary flight data, and real-world experience in this technology. A quadplane was developed by combining a structurally reinforced glider with VTOL and autopilot components. Its performance is obtained from static and aerodynamic studies and converted into the Ardupilot parameter format to define it in the simulation.

An AWES flight model was developed from the ground up to evaluate the performance of a simple flight controller in trajectory tracking. The Ardupilot Software-in-Loop (SIL) tool expands the simulation capabilities by running the flight controller code without requiring any hardware. This allowed controller tuning and flight plan evaluation with a more advanced fight model. AWES crosswind flight simulation was only possible due to the incorporation of an elastic tether and an ideal winch into the physics model. As a result, different trajectories and configurations were tested to find the optimal parameters that were uploaded to the flight controller board.

The operational capabilities of the AWES demonstrator were expanded with a flight testing campaign. By targeting individual objectives, each test gradually increased its complexity and ensured that the flight envelope was safely expanded. The results were validated with the simulation before moving on to the next flight test. The testing campaign is still underway due to challenges and limitations presented by the legal and logistical aspects of operating the quadplane. However, preliminary flight tests in VTOL mode have been completed and were consistent with the simulated results in terms of autonomous waypoint navigation and attitude control. / Graduate

Identiferoai:union.ndltd.org:uvic.ca/oai:dspace.library.uvic.ca:1828/11508
Date24 January 2020
CreatorsKlein-Miloslavich, Andreas
ContributorsCrawford, Curran
Source SetsUniversity of Victoria
LanguageEnglish, English
Detected LanguageEnglish
TypeThesis
Formatapplication/pdf
RightsAvailable to the World Wide Web

Page generated in 0.0027 seconds