Back Amorphous-Crystalline silicon Heterojunction (BACH) solar cells which combine the benefits of back contact and heterojunction silicon solar cells have been fabricated at the University of Toronto. p- and n-type amorphous silicon deposited at low temperature (~<200 oC) by DC Saddle-Field PECVD system forms interdigitated hetero-emitter and base contacts on the rear-side. A photolithography approach using thermal oxide for electrical isolation demonstrates the proof-of-concept. Three methods for fabricating simplified and advanced BACH cells were explored. The best performing 1 cm2 cell showed an AM1.5G conversion efficiency of 8.11%, VOC = 0.536 V, JSC = 20.1 mA/cm2 and FF = 75.5%. The BACH cell performance is limited by poor surface passivation and un-optimized cell design. With completely low temperature processing, highly passivated front and rear surfaces, and independent optimization of front-side optical antireflective features and rear-side electrical junctions and contacts, the BACH cell has the potential of becoming highly cost competitive.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/18322 |
Date | 19 January 2010 |
Creators | Hertanto, Anthony Iman |
Contributors | Kherani, Nazir P., Zukotynski, Stefan |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | en_ca |
Detected Language | English |
Type | Thesis |
Page generated in 0.0018 seconds