Return to search

Dimensionering av loftgångsbalkar i trähus / Design of access balcony beams in wooden houses

Det ska byggas två höga trähus med loftgångar på Sandåkern i Umeå. Tyréns AB samarbetar med Martinsons AB och Murman arkitekter i detta projekt. Syftet med det här examensarbetet är att beräkna om balkarna för loftgångarna i de två husen håller för belastningen. Att se till att balkarna håller när träet blir fuktigt samt räkna på att den ljuddämpande akustikplattan inte vidarebefordrar stom- och vibrationsljuden från loftgångarna Resultatet visar att den tilltänkta balken har en korrekt dimension med hänsyn till lasterna den utsätts för. Den tänkta akustikplattan på 25 mm räcker för att dämpa de stom- och vibrationsljud som uppstår. För att klara fuktkraven så krävs det att takpappen, som balken är monterad under, håller tätt. Gör den inte det kommer fuktkvoten accelerera till alarmerande höjder inom 1-2 år med röta och mögel som trolig påföljd. Hållfastheten minskar i och med att fuktkvoten ökar, vilket visar sig i att balken inte klarar nedböjningskravet vid kontroll av klimatklass 3. Allt sammantaget säger detta att den tilltänkta balken och ljuddämpande isoleringsplattan har rätt dimensioner så länge takpappen är monterad utan öppningar för vatten att ta sig in. / The study is based on a project that is a cooperation between Tyréns AB, Martinsons AB and Murman Arkitekter. They are about to construct two tall wooden houses in Sandåkern, Umeå. The purpose of this study was to define and calculate the beams, which are exposed to the highest amount of loads. This type of beam is located under the access balcony, which is on every floor between the apartments. These calculations also include the effects of moisture ratio and the acoustics plate´s ability to inhibit vibration noise. The results show that the investigated beam is sufficient, considering the loads that it will be exposed to. The acoustic plate prevents the noise and vibration from the access balcony to be heard inside the apartments. To be sure that the moisture ratio is acceptable it is important that the roofing felt is applied correctly. If not, the moisture will increase and within a few years the wooden beams probably will be weakened with rot and mold. The strength of the beam decreases with the same amount moisture ratio increases. As shown in the result of the control of climate class 3, the qualification of deflection is not achieved with higher moisture. In summary the investigated beam and the acoustic plate has correct dimensions, only if the roofing felt is mounted accurately with no open passages for moisture.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-83555
Date January 2013
CreatorsNilsson, Linnea
PublisherUmeå universitet, Institutionen för tillämpad fysik och elektronik
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageSwedish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0143 seconds