This document gives an overview of the proposed MSc study. The main goal of the study is to model the cases listed in the code benchmark study of the International Atomic Energy Agency CRP–6 fuel performance study (Verfondern & Lee, 2005).
The platform that will be employed is the GETTER code (Keshaw & van der Merwe, 2006). GETTER was used at PBMR for the release calculations of metallic and some non–metallic long–lived fission products. GETTER calculates the transport of fission products from their point of fission to release from the fuel surface taking into account gas precursors and activation products.
Results show that for certain experiments the codes correspond very well with the experimental data whilst in others there are orders of magnitude differences. It can be seen that very similar behaviour is observed in all codes. Improvements are needed in updating the strontium diffusion coefficient and in understanding, on a deeper level, the transport of silver in TRISO particles and how it deviates from simple diffusion models. / Thesis (M.Sc. Engineering Sciences (Nuclear Engineering))--North-West University, Potchefstroom Campus, 2012.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nwu/oai:dspace.nwu.ac.za:10394/7299 |
| Date | January 2011 |
| Creators | Ramlakan, Alastair Justin |
| Publisher | North-West University |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0016 seconds