This thesis has a theoretical and a practical part. The first part contains theoretical introduction to the phenomenon of increased stiffness at very small strains and possibilities of its practical applications. The available methods for evaluating initial shear modulus tests are described below. Increased attention is paid to the method of evaluation of test data in the frequency domain using the Fourier transform. The last chapter in this part describes an algorithm designed for automatic evaluation of measurements in the frequency domain. The practical part deals with measurement and evaluation of initial shear modulus for Brno clay as a function of vertical stress in oedometric test. Firstly, a device is presented that allows the extension of the oedometric test with sensors for measuring initial shear modulus of soil. This device was designed for the test in this thesis. Subsequently, the test plan is described including description of all soil samples. In this thesis, several types of soil samples from a single site were tested. Next, the results of the individual tests are evaluated by the selected methods. Examples are used for showing the differences in evaluation of the same data by other methods. At the end, the results of the individual tests for all sample types are compared with each other and with data from literature.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:455388 |
| Date | January 2022 |
| Creators | Havlíček, Jaroslav |
| Contributors | Koudela, Pavel, Chalmovský, Juraj |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds