Hepatic fibrosis is a progressive disease in which progression is correlated to liver mechanical properties. This correlation may be used to assess the state of the disease, and hence methods to determine the elastic modulus of the liver are of considerable interest. In order to assess the diseased state of the liver accurately, controlled experiments to establish baseline modulus values for healthy livers as well as diseased livers must be conducted. The focus of this work is the development of a protocol for mechanical testing combined with finite element modeling to allow for the evaluation of normal and fibrotic murine livers using multiple testing methods. The developed system employs a portion of liver tissue suspended in a cylindrical gel for CT imaging and mechanical testing. A finite element model is built from the CT images, and boundary conditions are imposed in order to simulate the testing conditions of the gels. The resulting model surface stress is compared to that obtained during mechanical testing which subsequently allows for direct evaluation of the liver modulus. Though the sample sizes for this initial work were small, the preliminary results indicate that the livers can be identified within the gel, and the fibrotic livers can be identified as having a higher modulus than the control livers, thus implying that the developed gel-tissue assay system could be used for controlled evaluation of soft-tissue moduli.
| Identifer | oai:union.ndltd.org:VANDERBILT/oai:VANDERBILTETD:etd-04022007-150119 |
| Date | 14 April 2007 |
| Creators | Barnes, Stephanie Lynne |
| Contributors | Michael I. Miga, John Gore |
| Publisher | VANDERBILT |
| Source Sets | Vanderbilt University Theses |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.library.vanderbilt.edu/available/etd-04022007-150119/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to Vanderbilt University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0014 seconds