abstract: Mechanical properties, in particular elasticity, of cancer cells and their microenvironment are important in governing cancer cell fate, for example function, mobility, adhesion, and invasion. Among all tools to measure the mechanical properties, the precision and ease of atomic force microscopy (AFM) to directly apply force—in the range of Pico to micronewtons—onto samples—with length scales from nanometers to tens of micrometers—has made it a powerful tool to investigate the mechanics of materials. AFM is widely used to measure deformability and stiffness of soft biological samples. Principally, these samples are indented by the AFM probe and the forces and indentation depths are recorded. The generated force-indentation curves are fitted with an elastic contact model to quantify the elasticity (e.g. stiffness). AFM is a precise tool; however, the results are as accurate as the contact model used to analyze them. A new contact model was introduced to analyze force-indentation curves generated by spherical AFM probes for deep indentations. The experimental and finite element analysis results demonstrated that the new contact model provides more accurate mechanical properties throughout the indentation depth up to radius of the indenter, while the Hertz model underestimates the mechanical properties. In the classical contact models, it is assumed that the sample is vertically homogenous; however, many biological samples—for example cells—are heterogeneous. A novel two-layer model was utilized to probe Polydimethylsiloxane hydrogel (PDMS) layers on PDMS substrates with stiffness mismatch. In this experiment the stiffness of the substrate was deconvoluted from the AFM measurements to obtain the stiffness of the layer. AFM and confocal reflectance microscopy were utilized along with a novel 3D microengineered breast cancer tumor model to study the crosstalk between cancer tumor and the stromal cells (CAFs) and the ECM remodeling caused by their interplay. The results showed that as the cancer cells invade into the extracellular matrix (ECM), they release PDGF ligands which enable Cafes to remodel the ECM and this remodeling increased the invasion rate of the cancer cells. Next, the effect of the ECM remodeling on anti-cancer drug resistant was investigated within the 3D microengineered cancer model. It was demonstrated that the combinatory treatment by anti-cancer and-anti-fibrotic drugs enhance the efficiency of the cancer treatment. A novel DNA-based 3D hydrogel model with tunable stiffness was investigated by AFM. The results showed the hydrogel stiffness can be enhanced by adding DNA crosslinkers. In addition, the stiffness was reduced to the control sample level by introducing the displacement DNA. Biophysical quantifications along with the in vitro microengineered tumor models provide a unique frame work to study cancer in more detail. / Dissertation/Thesis / Doctoral Dissertation Physics 2019
Identifer | oai:union.ndltd.org:asu.edu/item:54890 |
Date | January 2019 |
Contributors | Rahmani Eliato, Kiarash (Author), Ros, Robert (Advisor), Nikkhah, Mehdi (Committee member), Ozkan, Sefika (Committee member), Lindsay, Stuart (Committee member), Arizona State University (Publisher) |
Source Sets | Arizona State University |
Language | English |
Detected Language | English |
Type | Doctoral Dissertation |
Format | 147 pages |
Rights | http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0014 seconds