Warm mix asphalt (WMA) is an environmental friendly technology that
contributes to the workers safety, reduction of energy consumption and emissions. In this
study, the rheological properties of a PG 64-22 asphalt binder blended with Cecabase RT,
Rediset, Evotherm, and Sasobit WMA additives are investigated as a function of
laboratory aging. Binders modified with WMA additives and the control samples were
both aged in the rolling thin film oven (RTFO) at 143°C and at 163°C, respectively. All
samples were then long-term aged in an environmental chamber kept at 60°C. The longterm
aged samples were collected at different intervals during a six-month period.
Rheological data were collected on each aged sample by performing dynamic shear
rheometer (DSR) frequency sweep from 25 to 0.1 Hz. at three different temperatures, i.e.
45°C, 60°C, and 76°C. Samples were also evaluated with the Bending Beam Rheometer
(BBR) and Fourier-Transform Infrared (FTIR) Spectroscopy. Gauss-Newton method was
vii
used for non-linear parameter estimation for modeling the relationship of complex
modulus (G*) with temperature, frequency, and aging. Regression analysis was also used
for modeling BBR creep stiffness and BBR m-value. Although FTIR results show higher
oxidation levels for control than all WMA samples, DSR and BBR results show that
Sasobit tends to behave closely to control while Cecabase, Evotherm, and Rediset exhibit
lower stiffness than both. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2011-05-3543 |
| Date | 08 July 2011 |
| Creators | Trujillo, Patricia |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | thesis |
| Format | application/pdf |
Page generated in 0.0017 seconds