Self-organization of block copolymers becomes attractive for several branches of the current science and technology, which requires a cheap way of fabrication of well-ordered arrays of various nanoobjects. High ratio between the surface (or the interface) and the volume of the nanoobjects enables development of very efficient devices. The work within this thesis profits from the chemical dissimilarity between blocks of polystyrene-block-poly(4‑vinylpyridine) copolymers, where polystyrene forms “a body” of nanostructures and poly(4‑vinylpyridine) is “a link” for assemblies with low-molar-mass additives. Procedures and phenomena are demonstrated (observed) on few sorts of PS‑b‑P4VP copolymers with respect to their molecular weight and ratio of blocks. Although there are many kinds of nanostructures based on block copolymers, only nanotemplates are involved in the study. Their properties, like an influence of substrate roughness on microphase separation, stability of porous nanotemplates in ionized solutions, or a role of additives in their supramolecular assembly, respectively, are investigated. All of them appears to be important in development of various devices based on the nanotemplates. With respect to optoelectronic applications, electrical current transport and fluorescence are two basic phenomena studied on functionalized nanotemplates, developed in the thesis. DC transport is studied on nanostructures developed via sputtering of chromium into porous nanotemplates. Sputtering process is optimized in dependence of chromium deposition rate, composition and pressure of ambient gas. It is shown that a reactive nature of PS-b-P4VP nanotemplates enables development of resistant organometallic nanotemplates. On the other hand, suppression of the polymer reactivity is achieved by oxidation of a metal during sputtering in a reactive gas, which enables e. g. development of highly ordered TiO2 nanodots. Current-voltage characteristics are measured on “sandwich” devices (like LEDs) with various electrodes and composition. Several recent theoretical models fitting the characteristics are applied together with structural characterization techniques (like AFM or x-ray reflectivity) in order to elucidate relations among surface roughness, distribution of sputtered clusters, and carrier injection and transport. Fluorescence is studied on nanotemplates with organic low-molar-mass dyes, developed either via direct blending with the copolymer or via soaking of porous nanotemplates in dye solutions. Several relations between structure and fluorescence are observed. For instance, excimer emission in pyrene assemblies is supressed after ordering of the nanotemplate. Solvent induced orientation of fluorescein molecules in the nanotemplate results in fluorescence enhancement. Dimerization of Rhodamine 6G is dependent on the way of its impregnation in the nanotemplates (solvent, concentration, speed).
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:23990 |
| Date | 18 December 2007 |
| Creators | Krenek, Radim |
| Contributors | Stamm, Manfred, Wolff, Thomas, Cimrová, Věra |
| Publisher | Technische Universität Dresden |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:doctoralThesis, info:eu-repo/semantics/doctoralThesis, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0023 seconds