Two-dimensional (2D) layered hexagonal boron nitride (h-BN) has become a very popular material in nanoelectronics in recent years because of its extraordinary chemical stability and thermal conductivity [1]. Recently, h-BN is also commonly used as a dielectric material [2], and research in this area is still in its early stages. The commonly used methods for fabricating h-BN include mechanical exfoliation and chemical vapor deposition (CVD). CVD is a recognized industry-compatible method for producing large-area h-BN. However, studies have shown that multilayer h-BN grown by CVD is polycrystalline and contains multiple local defects [3]. These defects and inhomogeneity cannot be avoided and lead to small amounts of atom-wide amorphous regions that have weak dielectric strength [3]. Although the general characteristics of h-BN prepared by these two fabrication methods can be learned from different works in the literature, it is difficult to study the quality of h-BN without systematically comparing the differences between the two growth methods under the same experimental conditions and with large number of samples. This also makes it difficult for researchers to choose the best-quality h-BN.
In this work, the morphological characteristics and electrical properties of mechanically exfoliated h-BN and CVD-grown h-BN from different sources have been compared under different conditions. Commercially available h-BN flakes mechanically exfoliated from NIMS h-BN bulk crystal show no leakage current at electrical fields up to 25.9 MV/cm, and above this applied electrical force, the size of the conductive spots is extremely small (1.99 ± 1.81 nm2). On the contrary, “monolayer” CVD-grown h-BN samples from Graphene Supermarket were shown to be amorphous in ~20% of their area, which makes them appear discontinuous from an electrical point of view, plus they contain large thickness fluctuations up to 6 layers. Moreover, in nanoelectronic measurements collected with a conductive atomic force microscope (CAFM) working in vacuum, mechanically exfoliated h-BN showed better electrical homogeneity and presented later dielectric breakdown compared to the h-BN samples fabricated by the CVD method.
| Identifer | oai:union.ndltd.org:kaust.edu.sa/oai:repository.kaust.edu.sa:10754/685923 |
| Date | 10 November 2022 |
| Creators | Yuan, Yue |
| Contributors | Lanza, Mario, Physical Science and Engineering (PSE) Division, Zhang, Xixiang, Li, Xiaohang, Anthopoulos, Thomas D. |
| Source Sets | King Abdullah University of Science and Technology |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Rights | 2024-11-22, At the time of archiving, the student author of this thesis opted to temporarily restrict access to it. The full text of this thesis will become available to the public after the expiration of the embargo on 2024-11-22. |
Page generated in 0.0022 seconds