An important part of automobile safety is the braking system. Disc brakes have been widely used in automobiles for sped retardation for over 30 years. During that time, they have developed from a simple disc to a complex disc with channels, vanes, holes and grooves. The stopping capability of disc brakes is affected by the rate at which heat is dissipated by forced convection and the thermal capacity of the rotor. Catastrophic failure of brake rotors can occur during rapid increases or decreases in rotor temperature where regions of high temperature gradients result in high thermal strains. There is little information in the public domain regarding the relative merits of different disc brake rotor geometries, particularly in terms of airflow patterns, heat transfer rates, and internal thermal gradients. The aim of this research project was to investigate how geometrical variations affect the thermal performance of bi-directional disc brake rotors, particularly for high performance applications. Dynamometer testing showed that respectable increases in braking performance are achievable with relatively simple machining modifications. Tuft and smoke visualization techniques provided a preliminary understanding of the airflow in the passages of three distinct bi-directional rotor designs. Particle Image Velocimetry was used for detailed flow measurements which supported the numerical simulations. Computational Fluid Dynamics was used to predict the airflow and heat transfer associated with eight bi-directional brake rotor designs. The results show that 'pillared' passage designs can achieve higher heat transfer rates than traditional straight radial vane designs and that the heat loss from pillared rotors is generally more uniform than from vaned rotors. Subsequent conjugate heat transfer simulations found that temperature gradients inside pillared rotors are typically lower than inside vaned rotors. Thus failure rates due to excessive thermal strain are expected to be lower for pillared rotors. It was shown that rotor selection based solely on heat transfer rates is inappropriate and different passage designs are suited to different applications. The findings of this research will directly benefit local disc brake manufacturers, who do not have resources to conduct thorough studies comparing the thermal characteristics of different brake rotor designs.
| Identifer | oai:union.ndltd.org:ADTP/187889 |
| Date | January 2003 |
| Creators | Wallis, Lisa M, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. School of Mechanical & Manufacturing Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Lisa M Wallis, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0018 seconds